How to hang a Digital Wall Mural

If you’re looking for a fun feature wall for your home but not sure wallpaper will do the trick, then we’d like to introduce you to our new Digital Wall Murals collection. 
With 30 designs to choose from, ranging from Alice in Wonderland themed designs to geometric creations, our new wall murals cater to all styles. 

Now let’s get them on your wall. 

Preparing your wall

- Always ensure the wall surface is clean, dry, free of mildew and grease and is as smooth as possible in order to achieve the best results possible 
- Ensure all previous wallpaper, lining paper and adhesive has been removed from the wall before hanging.
The Tools You’ll Need 
- Soft dry cloth
- Lightly dampened cloth

- Sharp Knife

- Paste brush/roller

- Paste the wall wallpaper adhesive 

- Step Ladder

- Plumb line or spirit level

- Pencil

- Ruler 

Now you’re ready to get started.
1. When your wall is fully prepared, use a plumb line or spirit level to ensure you have a straight line to begin hanging your mural. The position of the first strip determines the overall look of the completed mural so take time to place it accurately. 

2. When ready to start hanging your paper be prepared to continue until all strips are hung, avoiding long periods between hanging each strip. Work from Left to Right.

3. First trim off the hanging instructions, keeping them nearby for reference

4. Using the printed guidelines, cut off the first strip of your mural.

5. Apply ‘paste the wall’ wallpaper adhesive to the wall, covering enough area for the first step. 

6. Apply the first strip to the wall, lining up to your plumb line/straight edge. Use a soft cloth to gently
work out any large air pockets downwards and outwards. Take care not to overwork each strip as this could result in stretching, making it harder to line up the following strips. 

7. Carefully remove any excess paste from the front of the mural using a lightly dampened cloth. Too much rubbing or cleaning may remove the ink from the paper. 

8. Repeat steps 4 to 7 for the remaining 5 strips of your wall mural, lining up the design and tightly butting up each join so that no gaps can be seen.

9. Trim any excess edges carefully after applying the paper. 

10. When all the strips of the mural have been hung, remove any excess wallpaper paste from the wall with a damp cloth.